MAXIMIZING PLANT POTENTIAL

An innovative platform to automate, monitor and control all aspects of the growing process.
Become a Master Grower.
Developed and Manufactured in Israel
LED Grow Lights
Controllers
Light App
Manual-Control
SeedlingClones
Early-Veg
Late-Veg
Early-Flower
Late-Flower
Flash

Create your Own Lighting Recipe

Seedling / Clone

Early Vegetive State

Late Vegetive State

Early Flowering

Late Flowering

Flushing Stage

Set the intensity, sunrise/sunset times as well as the fade in/out pace, on four channels : white, blue, red and far red to create your own light recipe or you use our preset
Give your seedlings or clones the perfect spectrum and intensity for the first 1-2 weeks.They start their lives, with an emphasis on cool white/blue and intensity of ~400 PPFD. Note: the distance from plant to light should be greater than 3 feet.
Progressing to a warmer white and an increased intensity helps the plants develop a healthy root system during the following week and start branching out. Note: the distance from plant to light should be greater than 3 feet.
Increasing intensity and changing the spectrum. During this stage the plants are developing their branches and creating bud site. Light intensity is ~600 PPFD and keep this light program until ~50% percent of your grow area is filled or until you are ready for flowering. Note: the distance from plant to light should be greater than 3 feet.
The first couple of weeks of flowering is a crucial time, light schedule changes to 12/12 but still spectrum is towards the cooler white., Your plants will transit to flower, while still creating more branches and bud site. This allows to manipulate the plant’s stretch and morphology to fit into your grow area. Hanging height should be 15’’-18’’.
After the plants have finished their all their stretching and all their energy is directed towards bud development. After the plants have finished their stretching and all their energy is directed towards bud development. Light intensity is at maximum and spectrum is towards the warm white with emphasis at 660nm, to encourage bigger bud with the right amount of the blue spectrum to improve trichome development. Distance from the canopy should be 15’’-18’’ for light intensity to be ~1000 PPFD.
The last 2 weeks of your grow. The spectrum and the intensity are similar to the late flowering but during the end of each cycle (sunset) we change the ratio of red to far red to gradually to create longer sunsets and shorter days. This signals the plant that it is the end of fall all energy going into bud development.
  • Create your Own Lighting Recipe
  • Seedling/ Clones
  • Early Vegetive State
  • Late Vegetive State
  • Early Flowering
  • Late Flowering
  • Flushing Stage
Light App
Create your Own Lighting Recipe
Set the intensity, sunrise/sunset times as well as the fade in/out pace, on four channels : white, blue, red and far red to create your own light recipe or you use our preset
Seedling / Clone
Give your seedlings or clones the perfect spectrum and intensity for the first 1-2 weeks.They start their lives, with an emphasis on cool white/blue and intensity of ~400 PPFD. Note: the distance from plant to light should be greater than 3 feet.
Early Vegetive State
Progressing to a warmer white and an increased intensity helps the plants develop a healthy root system during the following week and start branching out. Note: the distance from plant to light should be greater than 3 feet.
Late Vegetive State
Increasing intensity and changing the spectrum. During this stage the plants are developing their branches and creating bud site. Light intensity is ~600 PPFD and keep this light program until ~50% percent of your grow area is filled or until you are ready for flowering. Note: the distance from plant to light should be greater than 3 feet.
Early Flowering
The first couple of weeks of flowering is a crucial time, light schedule changes to 12/12 but still spectrum is towards the cooler white., Your plants will transit to flower, while still creating more branches and bud site. This allows to manipulate the plant’s stretch and morphology to fit into your grow area. Hanging height should be 15’’-18’’.
Late Flowering
After the plants have finished their stretching and all their energy toward bud development. After the plants have finished their stretching and all their energy is directed towards bud development. Light intensity is at maximum and spectrum is towards the warm white with emphasis at 660nm, to encourage bigger bud with the right amount of the blue spectrum to improve trichome development. Distance from the canopy should be 15’’-18’’ for light intensity to be ~1000 PPFD.
Flash
The last 2 weeks of your grow. The spectrum and the intensity are similar to the late flowering but during the end of each cycle (sunset) we change the ratio of red to far red to gradually to create longer sunsets and shorter days. This signals the plant that it is the end of fall all energy going into bud development.
CONSISTENT YIELDS
With ishence Automatic Control, Real Time Alerts, Data Logger and Analytics You Get Better And More Consistent Yields Year-Round.
0 %
Save Energy
Using ishence platform will Reduces your Electricity Usage By 40%. Water And Nutrients dispensing are also optimized.
Agronomic insight

With Image And Sensor Analytics Our System Can Help You In Your Decision Making Process: When And How Much To Water And Fertilize, When To Switch Into Flowering, Detect Deficiencies And Pests Early On.

Short Learning Curve

Anyone, Anywhere Can Grow High Quality Medical Herbs And Vegetables As Well As Optimize the Setup – Reducing Electricity, Nutrients And Water Usage.

A MODULAR SOLUTION FOR HYDRO/COCO GROWER
Brain Box

Connect sensors like : water E.C. and pH, environment temperature and relative humidity, water temperature You can also connect additional sensors like:co2, water level ,light quantum (ppfd) and more.

Control 12/24 DC like irrigation valve, dosage pump and more. Get automated control, data logger and real time notifications.

Add Sensor

You can also connect most of your stand alone professional sensors for remote sensing, data logger and alerts.
+

pH Sensor

+
EC Sensor
+
PPFD Sensor
+
Water Temp. Sensor
+
Air Temp/Humidity
+
Water Pump
+

Wireless Runoff Sensor

Control Box

A MODULAR CONTROL HUB – Use Timers Or Sensor Triggers To Control 4 110/220AC 4000 WATT Outlets Separately. Connect Grow Lights, AC, Irrigation Pump Or Whatever You Need To Automate Your Grow.

or whatever you need to automate your grow.

Hydroponic Controller
ishence Hydroponic Controller can adjust your pH and nutrient solution to perfectly fit your plant type, growth stage and environmental conditions.
We are an Israeli Agtech company aiming to provide growers with an affordable and effective solutions combining our agronomic knowledge with cutting edge technology.

This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Privacy Policy.